background image

4

About Waveguides:

Sound Waves in open space propagate in all directions, this way they lose their
power significantly. In order to counter this problem the SLA-30 incorporates
waveguide driver to ensure maximum control on power & dispersion. This ensures
pure performance and negates the possibilities of phase cancellations.

SLA 30 Kit:

The SLA 30 Kit is set of essential

hardware required for rigging & flying this line array
system. It consist of ultra durable Flybars / Array
Frames & Quick Release Pins (Push-Pull Bullets). This
kit makes flying the SLA 30 Series a very easy.

SLA 30 KIT:

Fly Bars & Quick Release Pins.

4. Features at a Glance

The SLA30 is a powered, two-way, full-range line array speaker system.

It is intended for small to mid size venues.

High performance single 8” LF & two 1.5" HF transducers.

In built Limiter.

Gain control. (-15dB to +6dB)

HF level attenuation switch for adjusting tonal balance for different system configurations.

Fast, integral rigging system.

Coverage Pattern: H100 degree x V10degree nominal, single unit.

High grade & durable Plastic cabinet design.

Easy carry handles & heavy duty protective steel grille.

5. Rear Panel Artwork:

1.

Balanced input that can be used for connecting an audio source with high level signal output

(e.g. preamplifier, mixer, cassette recorder, CD player, musical instrument, etc.).

Audio Input (Balanced Input):

2.

Audio output can be used to send Audio signal to other amplifier speakers, recorders or supplementary

amplifiers or to loop other SLA 30.

Audio Output:

3.

HF can be boosted by +3dB or can be cut by -3dB for improved performance.

HF Selection Switch:

The -3 dB position will typically be used for the speaker(s) in an array that are covering the nearest listening area.
The +3 dB position will be used for the speaker(s) covering the more distant areas; or to compensate for the low-frequency build-
up resulting from mutual coupling of multiple woofers in an array.

240V~ 50Hz, 450W MAX

T2.5A/250V~

ON

POWER

OFF

+6

-15

GAIN

HF

ATTENUA

TION

AUDIO INPUT

AUDIO OUTPUT

ON - LIMITER

-3dB

+3dB

0dB

Made in India

SLA 30

ACTIVE LINE ARRAY SPEAKER SYSTEM

R

1

6

7

8

2

3

4

5

2

3

1

2

3

1

3=COLD

2=HOT

1=GND

Summary of Contents for SLA 30













Reviews: