6
© STULZ Tecnivel – all rights reserved
EN/11.2020 Technical data subject to modifications
Air Handlers Units
ClimaPac Series
Accessories required to transport the unit (crossbeams, shackles, slings/ropes) are
not supplied by STULZ.
Detail of the
attachment system
Transport of several modules fixed together
Transport of individual module
Crossbeams
Eye bolt dimensions:
W= 40 mm
Ø = 34 mm
Lifting gear
For transportation of modules or complete unit, lifting gear must be attached to all
eyebolts of the baseframe.
2.3
Storage
If you put the unit into intermediate storage before the installation, the following measures have to be
carried out to protect the unit from damage and corrosion:
• Make sure that the water connections are provided with protective hoods.
• The stotage point must be dry and not exposed to direct sunlight. Recommended storage condi-
tions are as following:
• Temperature [°C]: -10 - +50
• Humidity [% rel. h.]: 5 - 95, without condensation.
• Units equipped with a steam humidifier must be stored in a place protected from frost.
• The unit should be stored packaged to avoid the risk of corrosion especially of the heat exchanger
fins.