8
EN/09.2019/G42 © STULZ GmbH – all rights reserved
cybercool 2 scroll original insTrUcTions
2. transport / Storage
2.1 delivery of units
Stulz chiller units are delivered unpacked and with pre-installed lifting lugs.
notice
the refrigerant circuit is filled with r410a refrigerant ready for use.
the chiller is labelled as follows.
1) Stulz logo
2) Stulz order number
3) Type of unit
4) Packing piece - contents
5) Warning symbols
• Due to the pre-filled refrigerant, the unit is marked as transport of dan-
gerous goods.
• The refrigerant is non-flammable and non-toxic.
• For special shipping indication, please contact our sales department.
• Special transport regulations must be checked country-specifically.
notice
When delivery is accepted, check the unit against the
consignment papers for completeness
and for external damage and record it on the consignment papers in the presence of the freight
forwarder.
•
You receive the consignment papers with the delivery of the chiller unit.
• The shipment is made ex works, in case of shipment damages, please assert your claim towards the carrier.
2.2 Storage
If you put the unit into intermediate storage before the installation, the following measures have to be carried
out to protect the unit from damage and corrosion:
• the storage point must not be exposed to direct sunlight. Observe the storage conditions in the chapter
“Application limits“.
• store the unit packaged to avoid the risk of corrosion.
• make sure that the water connections are provided with protective hoods.
