97
2670
© STULZ GmbH – all rights reserved EN/09.2019/G41
cybercool 2 screw original insTrUcTions
11.2 Option AxiTop
The AxiTop option is a fan extension, which directs the airflow at the outlet so that a laminar flow is produced
over a short section.
This will cause a reduction of the sound pressure level and sound power level by 4 dB(A) and a reduction in the
fan power consumption by approximately 15%.
The unit height increases by 160 mm to 2670 mm.
The external diffusor of the AxiTop is attached by two M6x12 lens
head screws at four points on the fan housing. The internal diffusor is
attached by four plastic clips at the support ring.
If the fan is exchanged, the AxiTop must be removed. When reas-
sembling, make sure that the cable cut-outs are located, where the
cables are routed.
The eight screws may be tightened with a torque of 9 Nm ± 1,4 Nm.
cable cut-outs
connection cables
support ring
external diffusor
internal diffusor
