14
6.1.2 Liquid Program
Sterilization
Press “START” Button
Vacuum, Add Water and Heat
Repeat Vacuum and Heat steps for 4 times, and then
Heat to Selected Sterilization Temperature.
Select Sterilization Temp
.
121°C or 134°C
Select Sterilization Item
Select Dry/No Dry 0/15/30/35/40 min.
Put the sterilization items and close door
Standard Sterilization Program
Select
Liquid Program
Button
Buzzer Alarms and
COMPLETE indicator will illuminate. The Sterilizer goes to
STANDBY mode.
If the COMPLETE indicator did not illuminate, repeat the sterilization cycle.
Drying Starts
(0/15/30/35/40 min.)
If Dry Timer selected
If Dry Timer
Not selected
Sterilization Finishes
without Exhausting
Step.
Sterilization Finishes and Exhaust Starts
Drain Water
Liquid Program
Heat to Sterilization
Temperature
