37
7.5.2 Set up
7.5.2.1 Set up date and time
Press “SET” button for adjusting the parameters of the recorder while in the stand-by mode.
Press increase (
▲
) or decrease (
▼
) until “1. Date / Time” displayed as shown in Figure 31.
Figure 31
Press “Set” button for editing the contents, and then press increase (
▲
) and/or decrease (
▼
)
button until current Date and Time presented.
The “Set” Button should be press for entering the parameter that you have changed, and
shift to next parameter.
The sequence is in the order of Year-Month-Date-Hour-Minute-Second each time you press
the “Set” button.
After entering the current Date and Time, press “Set” button returns to the Set manual, and
then to choose “8 EXIT” press “Set” button again returns to the stand-by mode as shown in
Figure 32.
Figure 32
7.5.2.2 Set up unit (temperature and pressure)
Press “SET” button for adjusting the parameters of the recorder while in the stand-by mode.
Press increase (
▲
) or decrease (
▼
) until “2. Unit” displayed as shown in Figure 33.
Figure 33
Press “Set” button for editing the temperature unit or pressure unit, and then press increase
(
▲
) and/or decrease (
▼
) button until the desired temperature unit or pressure unit
presented as shown in Figure 34.
Figure 34
1. Date / Time
2020-03-13
13:30:30
2. Unit
Temp:
°
C
Pressure: bar
