13
6. Operation
6.1 Operation Overview
6.1.1 Re-Dry Program
Sterilization
Press “START” Button
Vacuum, Add Water and Heat
Repeat Vacuum and Heat steps for 4 times, and then
Heat to Selected Sterilization Temperature.
Sterilization Finishes and Exhaust Starts
Buzzer Alarms and
COMPLETE indicator will illuminate. The Sterilizer goes to
STANDBY mode.
If the COMPLETE indicator did not illuminate, repeat the sterilization cycle.
Select Sterilization Temp
.
121°C or 134°C
Select Sterilization Item
Select Dry Time 0/15/30/35/40 min.
Drain Water
Put the sterilization items and close door
Drying Starts
(0/15/30/35/40 min.)
If Dry Timer selected
If Dry Timer
Not
selected
Select
Re-Dry Button
Re-Dry
(10 min.)
Standard Sterilization Program
