5
4. Installation
4.1 Environment
This equipment has been designed for use in accordance with the International EMC
(Electromagnetic Compatibility) Standards. In view of different environments, please follow the
instructions given below to eliminate interference, if necessary.
-
Move the equipment or rotate its direction;
-
Enlarge the space between the equipment and other machines;
-
Put the plug into other outlets;
-
Please consult with the local distributor or qualified electrician.
-
Regarding the environmental temperature for installation, please refer to “11 Specifications”.
4.2 Install the sterilizer
Caution:
Please read and follow “5.2” in order to understand the operation of the sterilizer.
Caution:
While installation; please make sure that the bearing capacity of installation table
is enough to carry the sterilizer. For the weight information of the sterilizer, please
refer to “Specifications”.
Caution:
Make sure that the door can be opened freely after installation.
Warning:
Do not install or operate the sterilizer in areas where flammable items or volatile
substances are used or stored. An explosion could occur, causing personal injury.
An installation site with good air circulation is required.
