How to set the time
1) Pull out the crown to the second click position.
2) Turn the crown to set hour and minute hands.
(Check that AM / PM is set correctly.)
3) Push the crown back into the normal position.
Note:
If the crown is pulled to the second position while the
chronograph is started, the chronograph hands will
continue to move. This is not a malfunction.
NOTE
It is not necessary to set the chronograph hands after the battery is exchanged. If the chronograph hands
position is incorrect, following below procedure all the chronograph hands will be reset.
How to set the date
1) Pull out the crown to the first click position.
2) Turn the crown clockwise for date setting.
*Do not set the date between 9:00 P.M. and 3:00
A.M. as this will cause a malfunction.
3) Push the crown back into the normal position.
3.How to reset (after battery change)
It is possible to reset by the following methods.
1) Pull out the crown to the second click position.
2) Press the button B for two seconds and release
the button.
3) Push the crown back to the normal position.
MODEL VK64/...VD53/...
