- 13 -
ENGLISH
INSTALLATION
1.
Step
Drill a hole of 60,5 mm through the door.
Additionally prepare a cutout of 10 mm in
the outer doorleaf to protect the locking
bolt from twisting.
2.
Step
Place the gasket
1
backwards on the out-
side housing
2
. Take care, that the groove
in the gasket is placed correctly onto the
square
3
of the twisting device.
1
2
3
R
L
4
4
3
3
2
2
5
5
3.
Step
Place the outside housing
2
in the door. Fol-
low the instructions below:
Right hand version: Place the green axe
4
with the grooves to the side. Lock indicator
5
shows red.
Left hand version: Place the green axe
4
with
the grooves to the top. Lock indicator
5
shows
red.
Make sure that the anti-rotation device
3
is
positioned in a correct way.
Summary of Contents for 37105001
Page 9: ...09 DEUTSCH INSTALLATION...
Page 17: ...17 ENGLISH NOTES...
