1
X
SAFETY INFORMATION
4
5
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m.,
EST, Monday - Friday.
PACKAGE CONTENTS
2
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• Do not allow children to play with or around log rack.
CAUTION
• Place rack on hard, dry surface.
• Protect rack from moisture.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble
the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly: Wrench, Allen wrench (included).
A
Questions, problems, missing parts?
Before returning to your retailer, call our customer
service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Printed in China
40-10-108
B
HARDWARE CONTENTS
(shown actual size)
ASSEMBLY INSTRUCTIONS
1.
Slip one U-shape tube (B) into the top of an
upright (A) as shown. Insert four M8 x 35 mm
bolts (CC) through predrilled holes, attach cap
nuts (EE), and tighten with wrench (FF) and
Allen wrench (GG).
Repeat entire process with second U-shape
tube (B) and upright (A).
2. Attach one
bottom tube (C) to upright
assembly by inserting
two M8 x 65 mm bolts
(AA) through predrilled holes. Attach Keps nuts
(DD) and tighten with wrench (FF) and Allen
wrench (GG). Repeat process with a second
bottom tube (C)
.
Repeat entire process with second upright
assembly and two more bottom tubes.
1
2
B
C
ITEM #0139852
MODEL #LS920-96CA
8 FT HEAVY-DUTY LOG RACK
WITH COVER
Français p. 8
Español p. 16
PART DESCRIPTION QUANTITY
A
Upright
2
B
U-Shape Tube
2
C
Bottom Tube
6
D
Support Bar
1
E
Cover
1
DD
EE
GG
M8 x 65 mm
Bolt
Qty. 16
AA
Wrench
(not actual
size)
Qty. 1
Keps Nut
Qty. 16
C
7
ASSEMBLY INSTRUCTIONS
4.
Attach support bar (D) by inserting two M8 x 40 mm
b
olts (BB) from the outside through the predrilled
holes in the support bar (D) and the bottom
tubes (C) as illustrated
. Attach
cap nuts (EE)
and tighten with wrench (FF) and Allen
wrench (GG).
4
B
AA
DD
AA
PART
DESCRIPTION
PART #
A
Upright
40-04-474
B
U-Shape Tube
40-08-146
C
Bottom Tube
40-08-147
D
Support Bar
40-04-475
E
Cover
40-08-148
AA
M8 x 65 mm Bolt
40-09-971
BB
M8 x 40 mm Bolt
40-09-970
CC
M8 x 35 mm Bolt
40-09-969
DD
Keps Nut
40-09-968
EE
Cap Nut
40-09-967
FF
Wrench
40-08-149
GG
Allen Wrench
40-08-150
A
CC
FF
Cap Nut
Qty. 10
M8 x 35 mm
Bolt
Qty. 8
CC
EE
Hardware Used
M8 x 35 mm
Bolt
x 8
CC
Cap Nut
x 8
EE
Wrench
x 1
FF
DD
Hardware Used
M8 x 65 mm
Bolt
x 8
AA
Keps Nut
x 8
DD
Wrench
x 1
FF
3.
Attach another bottom tube (C) to the end
of one of the assemblies as illustrated by
inserting two M8 x 65 mm bolts (AA) through
the
predrilled holes in each bottom tube (C).
S
ecure with Keps nuts (DD), and tighten
with wrench (FF) and Allen wrench (GG).
Repeat with second bottom tube (C).
3
Hardware Used
Hardware Used
M8 x 40 mm
Bolt
x 2
BB
Cap Nut
x 2
EE
C
B
A
C
D
D
M8 x 40 mm
Bolt
Qty. 2
BB
AA
CC
BB
DD
EE
GG
Allen Wrench
Qty. 1
Allen Wrench
x 1
GG
Allen Wrench
x 1
GG
M8 x 65 mm
Bolt
x 4
AA
Keps Nut
x 4
DD
Wrench
x 1
FF
Allen Wrench
x 1
Wrench
x 1
FF
Allen Wrench
x 1
GG
6
ASSEMBLY INSTRUCTIONS
DD
AA
5. Attach remaining upright assembly to the end
of the completed assembly as illustrated by
inserting M8 x 65 mm bolts (AA) through the
predrilled holes in each bottom tube (C). S
ecure
with Keps nuts (DD) and tighten with wrench
(FF) and Allen wrench (GG).
5
Hardware Used
C
M8 x 65 mm
Bolt
x 4
AA
Keps Nut
x 4
DD
Wrench
x 1
Allen Wrench
x 1
E
E
EE
D
BB
GG
FF
GG
FF
CARE AND MAINTENANCE
• Keep log rack protected from elements.
• Do not attempt to overload rack.
• Clean with mild detergent as needed.
ONE-YEAR LIMITED WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain warranty
service, call 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.
This warranty does not
cover defects resulting from improper or abnormal use, misuse, accident, or alteration. Failure to follow
all instructions in the owner’s manual will also void this warranty. The manufacturer will not be liable for
incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion of incidental or consequential damages may
not apply to you. This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
6
E
6. Unfold cover (E), place over log rack, and
use tie-downs to secure to rack.
®
Style Selections
®
is a registered trademark
of LF, LLC. All rights reserved.
100%
BLACK
FONT & SOFTWARE USAGE STATEMENT
COLOR USAGE & PRINT REQUIREMENTS
ALL INSTRUCTION MANUALS AND RELATED MATERIAL CREATED THROUGH
ADAPTATION OF THESE TEMPLATES MUST BE APPROVED BY LOWE’S
BRAND PACKAGING DEPARTMENT PRIOR TO PRODUCTION.
CONTACT: BRAND PACKAGING DEPARTMENT, LOWE’S COMPANIES, INC.
ATTN: PACKAGING STANDARDS
1000 LOWE’S BOULEVARD, MAIL STOP: 4WTD
MOORESVILLE, NC 28117
704-758-2785
DO NOT USE ANY COLOR GRAPHICS OR PHOTOGRAPHY IN YOUR INSTRUCTION
MANUALS. INSTRUCTION MANUALS PRINT IN GREYSCALE ONLY.
ALL GRAPHICS SHOWN ARE FOR SIZE AND POSITION ONLY; FINAL LINE-ART GRAPHICS
ARE REQUIRED FOR RELEASE TO PRESS.
IMPORTANT VENDOR NOTE
VENDORS ARE RESPONSIBLE FOR THE EXECUTION AND ACCURACY OF THEIR
INSTRUCTION MANUALS. THEY ARE SOLELY RESPONSIBLE FOR INSERTING ALL OF THE
CORRECT LEGAL CERTIFICATION, WARNING, WARRANTY, AND OTHER APPLICABLE
PRODUCT INFORMATION. HARDWARE MUST BE SHOWN AS ACTUAL SIZE IN THE
HARDWARE CONTENTS SECTION WITH LINE ART DRAWING OF THE HARDWARE, THE
DIMENSIONS, NAME DESCRIPTOR AND QUANTITY. LOWE’S IS NOT RESPONSIBLE FOR
ANY INCURRED DESIGN, TRANSLATION OR PRINTING COSTS. PLEASE REFER TO THE
TRANSLATION REQUIREMENTS ON LOWESLINK.COM
• FONTS USED ON THIS FILE: SEE FONT LEGEND.
• CONTACT YOUR APPROPRIATE FONT VENDOR TO PURCHASE THE REQUIRED FONTS
FOR THIS PACKAGE LINE.
• ADOBE ILLUSTRATOR CS3 WAS USED TO CREATE THIS FILE.
LOWE’S REQUIRES EACH VENDOR TO OBTAIN THEIR OWN LINE-ART GRAPHICS. ALL INSTRUCTION MANUAL GRAPHICS WILL
BE APPROVED BY LOWE’S BRAND MANAGEMENT DURING PROOFING.
THIS DESIGN IS PROPRIETARY AND CONFIDENTIAL TO LOWE’S COMPANIES, INC. AND CANNOT BE COPIED OR OTHERWISE
REPRODUCED OR USED WITHOUT THE EXPRESS WRITTEN PERMISSION OF LOWE’S.
THESE ARE THE PANTONE COLORS THAT ARE USED IN THIS FILE.
THESE MUST BE USED WHEN CREATING ANY OTHER PACKAGING.
THE ADDITION OF OTHER SPOT COLORS IS NOT PERMITTED.
ARTWORK DISCLAIMERS
FONT LEGEND
ALL FONTS MUST BE ARIAL BOLD OR ARIAL REGULAR, 12 PT. (MINIMUM) ON 14 PT. LEADING UNLESS OTHERWISE SPECIFIED.
REQUIRED PAPER TYPE
USE THE FOLLOWING PAPER FOR YOUR INSTRUCTION MANUALS:
• PAPER BASIS WEIGHT: 20-lb. PAPER OR 75 GRAMS/SQ METER
• DOCUMENT SIZE: PRINTED TWO-SIDES ON TABLOID OR A3 AND FOLDS
TO LETTER SIZE OR A4. INCLUDE SAMPLE MOCK-UP TO INDICATE
FOLD(S) AND PAGE LAYOUT.
THIS COLOR IS USED FOR
NOTES AND DOES NOT
PRINT.
CALL OUTS
(DO NOT PRINT)
THIS COLOR INDICATES
ALL TEXT TO BE CHANGED
WITH PRODUCT SPECIFIC
TEXT.
EDITABLE TEXT
(DO NOT PRINT)
