7
A250
OPERATION INSTRUCTIONS
CONTROL PANEL LOCATION
REMOTE RECEIVER
FUNCTION
ICON
DESCRIPTION
POWER
The power button supplies power to all of the
fireplace functions.The power button will put
the insert in a standby mode. This will turn off
all functions at once, but will hold the settings
in the memory. By pressing the Power button
again, the unit will turn on with the retained
settings.
FLAME
HEATER
TIMER
The stove contains a fan forced infrared
element heater.
The thermostat setting range is 62°F - 82°F
(17°C - 27°C) or continously ON or OFF(00).
Set the heater to (00) to use the flame effects
without the heat.
The thermostat is adjustable by 2°F or 1°C
increments by pressing the HEATER button
on the control panel.
To change between °F and °C press and hold
the HEATER button on the control panel for
3 seconds.
The button on the remote only turns the
heater on/off to the thermostat setting
selected with the control panel.
There are 5 brightness levels that can be
selected and OFF (00) setting. Settings F5 -
F1 decrease in brightness.
Pressing the timer button will cycle through
the timer settings; 30 minutes, 1 Hour, 2H,
3H, 4H, 5H, 6H, 7H, 8H, 9H and off (00).
