2
3
4
5
1
PACKAGE CONTENTS
PART DESCRIPTION
QUANTITY
Lamp Shade
Bulb
Lamp Holder
Lamp Base
1
1
1
1
A
B
C
D
A
EB13647
WARRANTY
The manufacturer warrants this product to be free from defects in workmanship and material
present at time of shipment from the factory for one year (1) from the date of purchase. This
warranty applies only to the original purchaser. The manufacturer agrees to correct such defect
at no charge or at our option replace the lamp with a comparable or superior model.
To obtain warranty service, call our customer service department at 1-877-888-8225 for return
authorization and shipping instructions. You may be required to present a copy of your sales
receipt as proof of purchase. All cost of removal and reinstallation are the express responsibility of
the purchaser. Any damage to the lamp by accident, misuse or improper installation, or by affixing
accessories not produced by the manufacturer, are the purchaser’s responsibility. The
manufacturer assumes no responsibility whatsoever for lamp installation during the warranty
period.
There is no further expressed warranty. The manufacturer disclaims any and all implied
warranties. The manufacturer shall not be liable for incidental, consequential or special damages
arising at or in connection with product use or performance except as may otherwise by accorded
by law. This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. This warranty supersedes all prior warranties.
Questions, problems, missing parts?
Before returning to your retailer, call our customer
service department at 1-877-888-8225, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -
5 p.m., EST, Friday.
Français p. 6
Español p. 11
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
ITEM #0061727
MODEL #XHLWDC001
SPINNING DISCO BALL
C
D
B
A
D
A
D
B
D
Printed in China
Style Selections
®
is a registered trademark
of LF, LLC. All rights reserved.
Lowes.com
Style Selections® is a registered trademark
of LF, LLC. All rights reserved.
Lowes.com
Lowes.com
Lowes.com
Lowes.com
BULB REPLACEMENT INSTRUCTIONS
1. While holding lamp base (D), turn the ball (A) counter
clockwise to disengage the tabs on the ball from
the holes on the plate. Remove the ball to access
the bulb for replacement.
2. Remove the bulb (B). Replace only with a 25-watt
T type E12 base bulb or one 13-watt E12 CFL Bulb
or LED equivalent.
3. To reinstall the ball (A), hold the lamp base (D) on the
fixture, insert the tabs on the ball into the holes on the
lamp base (D) and turn the ball clockwise to secure.
The lamp assembly is now complete.
1
2
3
•
•
•
CARE AND MAINTENANCE
Clean base with a damp cloth.
Do not use any chemicals, polishes, or abrasives.
Do not immerse fixture in water; doing so will damage the wiring.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
When unpacking and assembling, do not pull on the wire too hard or damage may occur.
A damaged wire may not have full strength.
Only use the bulb and wattage specified in these instructions or on the label located on the socket.
Standard-base (type-T) bulb of 25 watts or below only should be used.
Do not attempt to replace the bulb while the lamp is plugged into an electrical outlet.
Do not use outdoors or near water or other liquids.
During shipment, the socket cover might have loosened. Before inserting bulb, check to see that
the socket cover is secure.
This portable lamp has a polarized plug. One blade is wider than the other as a safety feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never
use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this
safety feature.
CAUTION
To reduce the risk of fire, use 25-watt type T or smaller bulb.
Unplug from outlet before removing any parts and cleaning.
Only use a soft cloth for cleaning. Do not use any chemicals or abrasive cleaners.
Remove the cellophane cover from shade before use.
•
•
•
•
•
•
•
•
•
•
PREPARATION
Before beginning assembly of product, make sure all parts are present. Carefully remove all parts
from box and remove all plastic covering the parts. Compare parts with package contents list. If any
part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 3 minutes
No tools are required for assembly
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Bulbs will not light.
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
Fuse blows or circult
breaker trips when light
is turned on.
Crossed wires or power is
grounding out.
Check wire connection.
11” (H)
8.5” (W)
ENG
