background image

                   

ARM-GZB208-E1-1 

13

 

8.4 Result 

After treatment if skin turns a little red, a little heat and last for long, a little 
pain, hair is curve, it means the treatment is successful; 
Normally each treatment needs 1-2 times’ continual shots. 

8.5 Discomfortable Feeling 

During treatment, customer may feel differently; 
Some may feel himself is bit by small mosquito; 
After hair removal, skin may feel hot for an hour   

8.6 Notes after Treatment 

1. If there are blain and ulceration coming into being in the skin after 

the treatment, it is recommended to use antibiotic ointment and 
anti-burn ointment to treat. 

2. Customer can use high multiple sunscreen and keep the skin 

moistly. 

3. After treatment, skin around the treated parts may be fragile, if this, customer 

shall not make up and avoid friction

since it may cause skin hurt

4. NOTE: This equipment has been tested and found to comply with the limits 

for a digital device, pursuant to Part 18 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in 

a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. 

If this equipment does cause interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of the following measures:

    

o.Reorient or relocate the receiving antenna  

o.Increase the separation between the equipment and receiver  

o.Connect the equipment into an outlet on a circuit different from that to which 

   the receiver is connected  

o.Consult the dealer or an experienced radio/TV technician for help  

 

Summary of Contents for B208














Reviews:

Related manuals for B208