INSTALLATION GUIDE
ST-03 | ST-07
LUXURY BASKET STRAINER
1. Rinse the strainer with water.
2. Coat the strainer with baking soda, Flitz or Barkeepers friend.
3. With sponge, scrub strainer and all sink walls in the direction of
4. Spray on undiluted vinegar.
the steel grain.
CARE AND CLEANING
5. Rinse again.
6. Buff with a few drops of olive oil.
7. If necessary, repeat procedure.
TOLL
FREE
IF YOU HAVE PURCHASED A
LUXURY BASKET STRAINER
, PLEASE MAKE SURE TO READ THESE INSTRUCTIONS CAREFULLY
Place foam gasket and strainer body on
the top side of drain opening.
Alternatively Plumber's Putty could be
used instead of foam gasket.
From underneath bring outer basket with
rubber gasket under the sink and secure
with basket nut.
Tighten basket nut using channel locks or
wrench.
Insert tail pipe with nut into home's
plumbing, then align and secure
tail pipe nut to strainer body.
Tighten tail pipe nut to strainer body,
ensure the rubber gasket is present.
Run water and confirm no leaks.
1
2
3
4
5
6
Sink
Foam
Outer
gasket
Rubber
gasket
Basket nut
Rubber
gasket
Basket
Lid
Strainer
body
Tail pipe
Tail pipe nut
+1-855-789-5352
WARRANTY
WATCH OUR VIDEO ON
YOUTUBE
TOLL
FREE
www.stylishkb.com
care@stylishkb.com
For additional technical assistance or for
any questions or concerns about your
kitchen strainer's warranty, please contact
us.
www.stylishkb.com/warranty
Products and specifications shown are subject to change without notice. Please contact our technical support at care@stylishkb.com for any further queries, replacement parts requests, etc.
©2021 Stylish® all right reserved.
Stylish International Inc.
stylish.international.inc
Follow us on Instagram! Check out and let us know your comments
Installation of Stylish® Sink
Luxury Basket Strainer
