background image

10

EN

FR

DE

NL
ES

IT

PT

GR
NO

SE

FI

DK
RU

2. STARTING

Pull the starter handle slowly until resistance is felt. This is the “compression” 
point. 

Return the handle to its original position and pull swiftly. Do not pull the rope 
out all the way. After starting the engine, allow the starter handle to return to its 
original position while still holding the handle.

FOR ELECTRIC STARTER MODELS.

Insert the key into the key slot and set it at the “ I ” (ON) position. Turn it to the right (START position) to start the engine.

 

Do not operate the electric starter continuously for more than 5 secounds, even if the engine dose not start.

 

If the engine failed to start, set the key to the “ I ” (ON) position and wait for about 10 secounds before retrying. 

 

Never turn the key switch to the START position while engine is running.

TYPE 3: Auto choke

1. CHOKING

(1)  Open the fuel valve. (position “ I ”)

(2)  Turn the engine stop switch ON. (position “ I ”) (if equipped)

(3) Disengage the brake. (mower only)

 Disengage (Brake : OFF)

 Engage  (Brake : ON)

1

2

EA175̲190V̲en̲EU7482.indd   10

EA175̲190V̲en̲EU7482.indd   10

2013/01/15   20:35:30

2013/01/15   20:35:30

Summary of Contents for EA175V
























Reviews: