Subaru EA175V, Instructions For Use Manual

17

EN
FR
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
RU

1

NOTE : 

Clean and replace air cleaner elements more often when operating in dusty environments. Replace the element in case that dirt or 
dust can not be removed and/or that the element is deformed or deteriorated.

6.  BLADE INSPECTION (MOWER ONLY)

In case of blade inspection, drain fuel and oil before maintenance. 
if these process do not skip, it may case trouble.

7.  FUEL HOSE REPLACEMENT 

 WARNING

Take extreme caution when replacing fuel hose ; 

gasoline is extremely 

fl

 ammable.

Replace the fuel hose every 2 years. 
If fuel leaks from fuel hose, replace the fuel hose immediately.

8.  CHECKING BOLTS, NUTS AND SCREWS

■

Retighten loose bolts and nuts.

■

Check for fuel and oil leaks.

■

Replace damaged parts with new ones.

1

2

B. Urethane Foam Element Type

Remove the element and wash it in a solution of mild detergent and warm 
water. Then rinse the element thoroughly in clean water. Allow the element 
to dry thoroughly. Apply a tablespoon (6cc) of motor oil to the clean and 
dry foam element and squeeze the element several times to distribute the 
oil evenly throughout the foam. Then squeeze the foam element in a paper 
towel to absorb any excess oil.

❶

 Urethane Foam Element

C. Dual Element Type

■

For urethane foam, remove it from the paper element and wash it 
thoroughly with detergent. Then dry it before installing. 

■

For the paper element, clean by blowing on it with compressed air 
from the inside or tapping on it gently to remove dirt. Change the 
paper element when doing this fails to remove the dirt.

❶

 Paper Element

❷

 Urethane Foam Element

EA175̲190V̲en̲EU7482.indd   17

EA175̲190V̲en̲EU7482.indd   17

2013/01/15   20:35:34

2013/01/15   20:35:34