Subaru EA175V, Instructions For Use Manual

7

EN
FR
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
RU

3. THROTTLE SETTING

(1)  After the engine starts, move the throttle control lever to the HIGH position 

❸

.

(2)  Turn the throttle control lever for the required engine speed. 

(Between 

❷〜❸

)

❶

 STOP

❷

 LOW

❸

 HIGH

❹

 CHOKE

4. STOPPING

FOR MOWER

(1)  Turn the throttle control lever to the LOW position 

❷

 and lessen the engine 

speed.

❶

 STOP

❷

 LOW

❸

 HIGH

❹

 CHOKE

(2)  Release the brake wire. (Brake : ON)

❶

 Disengage (Brake : OFF)

❷

 Engage  (Brake : ON)

1

2

3

4

1

2

3

4

1

2

2. STARTING

Pull the starter handle slowly until resistance is felt. This is the “compression” 
point.
Return the handle to its original position and pull swiftly. 
Do not pull the rope out all the way. After starting the engine, allow the starter 
handle to return to its original position while still holding the handle.

FOR ELECTRIC STARTER MODELS.

Insert the key into the key slot and set it at the “ I ” (ON) position. Turn it to the right (START position) to start the engine.

■

Do not operate the electric starter continuously for more than 5 secounds, even if the engine dose not start.

■

If the engine failed to start, set the key to the “ I ” (ON) position and wait for about 10 secounds before retrying. 

■

Never turn the key switch to the START position while engine is running.

EA175̲190V̲en̲EU7482.indd   7

EA175̲190V̲en̲EU7482.indd   7

2013/01/15   20:35:29

2013/01/15   20:35:29