7 OF 7
ISSUE
00
DATE
22 Jun 2018
SUBARU OF AMERICA
PART NUMBER
H001SFL300
POST INSTALLATION CHECKLIST
11
4280845 Rev - 6/22/18
1. REMOTE ENGINE START - Ensure the Access key (FACTORY transmitter) is removed from the vehicle,
the engine hood, all doors and trunk or hatch are closed. Press the LOCK button on the Access key one (1)
time to lock the vehicle doors. Press the START button on the remote start transmitter two (2) times within
three (3) seconds. The vehicle’s parking lights should fl ash and the vehicle’s horn should honk one (1) time
and then the vehicle should crank and start. Once started, the transmitter LED will fl ash two (2) times and
the parking lights will turn on and stay on signifying the vehicle is running. The transmitter LED will fl ash
one (1) time every three (3) seconds signifying the vehicle is still running.
2. CUSTOMER TAKE OVER - While the vehicle is running by the remote engine start, wait at least fi ve (5)
seconds and then confi rm that all functions (lock, unlock & truck or hatch, but not panic) operate properly on
the Access key. Once the Access key functionality is confi rmed, press the UNLOCK button on the Access
key, open the driver’s door and enter the vehicle with the Access key. Press and hold the brake pedal, press
the ENGINE START/STOP button on the dashboard one (1) time and move the shift position lever from
the “P” position to the “D” position and back to the “P” position. The remote engine start should shut down
and the transmitter LED should fl ash three (3) times indicating the system has shut down, but the engine
should remain running. Press the ENGINE START/STOP button on the dashboard one (1) time to turn off
the vehicle.
3. ACTIVATION WITH DOOR UNLOCKED - Ensure the Access key is removed from the vehicle, the engine
hood, all doors and trunk or hatch are closed and the driver’s door is unlocked. Press the START button
on the remote start transmitter two (2) times within three (3) seconds. The vehicle’s parking lights should
fl ash and the vehicle’s horn should honk six (6) times. The vehicle should not start with the driver’s door
unlocked.
4. ACTIVATION WITH DOOR OPEN - Ensure the Access key is removed from the vehicle, the engine hood,
all doors and trunk or hatch are closed. Open the driver’s door and press the START button on the remote
start transmitter two (2) times within three (3) seconds. The vehicle’s parking lights should fl ash and the
vehicle’s horn should honk six (6) times. The vehicle should not start with any door, trunk or hatch opened.
5. HOOD SAFETY SWITCH - Open the engine hood and activate the remote engine start. The vehicle’s parking
lights should fl ash and the vehicle’s horn should honk two (2) times. The vehicle should not start since the
hood safety switch is activated.
6. HEATER / AC FUNCTION - With the Access key inside the vehicle, press the ENGINE START/STOP button
on the dashboard two (2) times to turn ON the ignition. Preset the vehicle’s heater or air conditioning to
the ON position. Press the ENGINE START/STOP button on the dashboard one (1) time to turn OFF the
ignition and remove the Access key from the vehicle. Activate the remote engine start and verify that the
heater or air conditioning turns on to the preset setting for manual climate controlled vehicles or turns to the
“Full Auto” setting for electronic climate control vehicles.
7. 15 MINUTE RUN TIME - Activate the remote engine start and allow the system to run for the 15 minute
preset run time. The remote engine start should shut down after 15 minutes (+/- 10 seconds).
8. TRANSMITTER FUNCTIONALITY VERIFICATION - Activate the remote engine start using both of the
supplied single button remote start transmitters.
FUNCTIONAL TESTING IS NOW COMPLETE.
