4 OF 14
PART NUMBER
H001SFL400
ISSUE
01
DATE
25 Jul 2018
SUBARU OF AMERICA
8. Using a panel removal tool, carefully remove the right side
dashboard panel by starting at the bottom access notch
and working upward to disengage four (4) pressure clips.
(FIGURE J)
FIGURE J
FIGURE K
FIGURE I
FIGURE L
9. Using a panel removal tool, carefully lift upward to disengage
four (4) pressure clips and one (1) fi nger clip and then pull
rearward to remove the passenger’s side ornament panel.
(FIGURE K)
7. Open the glove box and press inward on the sides of the
glove box to disengage the retaining tabs from the glove box
inner cover. Disconnect the strut from the glove box.
(FIGURE
I)
10. Using a Phillips screwdriver, remove seven (7) Phillips screws
securing the glove box inner cover. Disengage the six (6)
pressure clips and disconnect the glove box lamp connector
to remove the glove box inner cover. (FIGURE L)
4
VEHICLE PREPARATION, continued
