Vehicle Disassembly
1. Place the Vehicle in Park with the Parking Brake set.
2. Disconnect the Negative Battery Terminal.
•
Do not touch the Positive Battery Terminal with the
Negative Terminal.
•
Note the Battery Cable Position as it will be reinstalled in
the same position.
•
Wait at least 30 seconds after disconnecting the
Negative Battery Terminal before disconnecting the
Airbag Connector.
•
After the work with battery disconnected, some vehicle
system should be reconfigured. See service manual.
3. Remove the Passenger's Side Fender Cover.
•
Remove 2 Clips.
4. Remove the Driver’s Side Dash Cover.
•
Disengage 4 Clips.
•
Disengage and remove cover from the bottom first
and work upward.
5. Remove the Lower Dash Cover No.1.
•
Remove 1 Screw.
•
Disengage 8 Clips.
•
Disconnect Vehicle connectors.
6. Remove the Lower Dash Cover No.2.
•
Remove 1 Screw.
•
Disengage 8 Clips by pulling both the top and
bottom of the panel simultaneously.
- 3 -
