Check F (SES simple diagnosis check)
1. Connect the 1P SES Diagnostic Connectors.
2. Press the "ENGINE START STOP" Button twice to
switch ignition ON and wait for 3 seconds.
3. Press down the brake pedal once.
4. Look for the car horn to sound (parking lights flash
the same number of times).
Record the number of times the car horn sounds, and
check the table on next page for the possible cause of
Engine Stop. Be aware that pressing the brake pedal
again makes the car horn sound. Make sure to wait until
the car horn stops before pressing the pedal again.
5. Disconnect the 1P SES diagnostic connectors
(Disconnecting deletes the causes of the problem).
- 34 -
