PART NUMBER
H001SXA000
3 OF 10
ISSUE
01
DATE
03/1
4
/06
SUBARU OF AMERICA
6. Using a panel removal tool, un-clip and remove the
driver’s side lower dashboard panel and un-plug any
connectors. (FIGURE F)
7. Unplug the diagnostic plug by releasing the side clip on
the connector. Unplug the 2-way connector for the
under dashboard light and remove the driver’s under
dashboard panel. (FIGURE G)
8. Unplug the 2-way connector and air tube connected to
the right side of the metal knee bolster. Remove the
metal knee bolster by removing the (4) 10mm bolts.
(FIGURE H)
FIGURE F
FIGURE G
FIGURE H
VEHICLE PREPARATION (CONTINUED)
WINDSHIELD MOUNT ANTENNA INSTALLATION
5
1. Locate the position at the top of the windshield 1” left
of center and 1” from top of headliner. (FIGURE I)
2. Using alcohol clean the area thoroughly.
3. Remove the adhesive backing on the antenna
assembly and apply the antenna to the windshield in
the area indicated above. (FIGURE I)
4. Using a panel removal tool, carefully remove the
airbag labeled cap at the top of the A-pillar and
remove the 10mm bolt. (FIGURE J)
5. Gently remove the A-pillar panel starting at the top
releasing the pressure clip at the bottom of the panel.
(FIGURE J)
FIGURE I
FIGURE J
