9 OF 12
ISSUE
-
DATE
10 Jan 2018
SUBARU OF AMERICA
PART NUMBER
H001SXC100
WARNING: / ADVERTISSEMENT
WARNING: / ADVERTISSEMENT
3. Remove the four (4) release liners from the remote
engine start ECU foam tape and attach it to the glove
box inner cover, as shown. Press fi rmly in place for at
least thirty (30) seconds. (FIGURE W)
NOTE: Ensure the Remote Engine Start ECU
connectors will be facing forward, toward the
vehicle’s dashwall when reassembled.
4. Plug the remote engine start harness 12-pin and
8-pin connectors into the remote engine start ECU.
(FIGURE W)
5. Secure the remote engine start harness to the wire
harness clips. (FIGURE W)
NOTE: Ensure the Remote Engine Start Harness is
NOT too tight to avoid stress on the ECU connectors.
REMOTE ENGINE START ECU MOUNTING, continued
6
FIGURE W
7
UNDER HOOD WARNING LABEL MOUNTING
1. Using alcohol, clean the top, right side of the radiator
core support.
2. Remove the release liner from the under hood
warning label and secure to the top of the radiator
core support, as shown. (FIGURE X)
FIGURE X
