4
Figure 7
9. Remove one plastic screw and two metal screws
indicated by the arrows in Figure 7, then remove the
lower dash panel by pulling the upper side of the
lower dash panel toward you.
10. Disconnect the four harnesses (two white housings,
one brown housing and one black housing) on the
lower dash panel. Then, completely remove the
lower dash panel.
Figure 9
11. Locate the security module 18-pin (white housing)
connector which is located at the inner right side
(Next to the center console). See Figure 9.
Figure 8
NOTE: To detach the black housing, insert a slot-
ted screwdriver as shown in Figure 8 and
lift up the black housing. The black hous-
ing can be detached easily.
