12
System and operation
The following settings may be changed with Dive.Log or via "set 1" or "set 2" directly on Subgear
XP-3H:
Setting
Range
Default
Page
•
CCR mode
• Depth alarm
• Dive time alarm
• Safety stop time
• Tank pressure warning and alarm
• PDIS
• Tank pressure unit
• Salt water
• Backlight duration
• Maximum partial pressure of oxygen
(ppO2
max)
• Time limit to reset the O2% mix to air
• Unit system
• Audible attention signals
• Water contacts
• Reset desaturation
•
Gauge mode
• Alarm clock
• UTC (Universal Time Change) zone
• Time of day
• 24 or AM/PM setting
• Date
• Display contrast
•
IrDA speed setting (only “set 2”)
• Sound
on / off
5-100m / 15-330ft
5-195 min
off, 1-5 min
warning 50-200bar/750-3000psi
alarm 20-120bar / 300-1750psi
on / off
bar / psi
on / off
2-12s / push on/off
1.2-1.6bar
no reset / 1 - 48hrs
metric/imperial
on / off (Dive.Log: selective)
on / off
on / off
on / off
0 - 23h 59min, on/off
±13hrs, increments: 15min
hours:minutes
24 (off) / AM/PM (on)
1 (low) -12 (high)
low / high
on / off
off
40m/130ft
60min
3min
100bar/1450psi
40bar/600psi
off
bar
on
6s
1.4bar
no reset
on
on
no reset
off
12:00, off
4
low
on
68
68
69
69
69
69
70
70
70
69
69
70
70
70
71
32
72
72
72
72
72
73
73
73
The following data may be recalled with Dive.Log:
•
Number of past dives
•
Dive profile
•
Total duration of dives
•
Logbook
• Deepest
dive
• Temperature
curve
•
Longest dive
•
Alarms and attention messages
• Atmospheric
pressure
• Battery
condition
•
Tank pressure at beginning and end of the dive
Downloading your dives
Subgear XP-3H’s memory allows you to store approximately 15 hours of
dive profile information in 4 second sampling intervals. With Dive.Log you
can transfer this information to the PC in order to visualize and analyze your
dives on the monitor. To download data from Subgear XP-3H, click on
"NEW" under the "LOGBOOK" menu to open and name a new logbook or
open an existing logbook. Then click on the "TRANSFER DIVES" icon: a box
will appear on the screen identifying the computer being downloaded, and
a progress bar will show the status of the transfer.
You can choose between transferring all dives or new dives only (default
setting) from Subgear XP-3H’s memory. If you choose to transfer new dives
only, Dive.Log will only transfer dives that are more recent than the most recent dive already saved in
the PC logbook. To transfer all dives, you must change the default setting by selecting "Transfer" under
"Dives" in the main menu bar. Once the data is downloaded, a window will show you a summary table
of all dives; for the selected dive, another window will show you its details. From these windows you
can add and edit your dive information.
