AML+ Tiny BootLoader
This utility is used to install AML+ firmware
updates.
INSTALL SOFTWARE TO YOUR COMPUTER
Download Tiny BootLoader File
1.
Download SSI Tiny BootLoader Utility from
the SSI web site at http://www.ssilocators.
com/specialty-products/all-materials-locator-
plus-series/, found on the Downloads tab
on the SSI website. Save the file to the
Downloads folder in your computer.
2. Go to the Downloads folder and extract
the file from the compressed file. If your
Operating System doesn’t have compress
software, you can go to http://www.winzip.
com/win/en/downwz.html to download a free
version.
3. Move the tinybldWinBeta.exe file to the
desktop, for easy access.
4. This is a very simple application, once you
have the file on your desktop, it is ready for
use.
Note:
After completing the firmware update
process, your unit will need to be recalibrated,
use the AML+ Customer Utility to calibrate the
AML+ and to run diagnostics requested by the
manufacturer.
Updating the Firmware on the AML+
1. Connect the AML+ to your computer with the
supplied USB mini cable. Turn on the AML+;
if this is the first time you connect your unit
to the computer, an automatic notifications
will display: “New hardware has been
detected” and “Installing new device driver”.
When your operating system completes
its automatic driver installation, you will be
ready to proceed to the transfer process.
APPENDIX
(FIRMWARE UPDATE)
PIC
tinybldWin...
Figure 15-2
Figure 15-3
Figure 15-1
15
