Page 14
4
Remove the element form the unit.
ELEMENT INSTALLATION
Install the Element
1
Install the gasket seal onto the element.
2
Connect the electrical wires to the element.
3
Install the element through the back wall of the oven cavity.
4
Use a T-20 Torx bit to install the screws and washer into the
element.
Install the Rear Baffle
1
Place the rear baffle against the back wall of the oven
cavity.
2
Use a T-20 Torx bit to install the screws into the rear baffle.
Install the Rack Guide
1
Insert the rack guide rails into the rear baffle.
2
Place the indent in the rack guide over the rack guide stud.
3
Install the rack guide nut.
Install the Rack
1
Insert the rack between the rails of the rack guide.
2
Push the rack into the oven.
CSO (SWS #13543126)
Cavity Component Removal and Installation
REMOVE THE ELEMENT (continued)
service.subzero.com
827703 REVA 02/2018
13
