Page 11
Theory of Operation
MD24 and MD30
#824820 - Revision A - November, 2013
3-3
MANUAL COOKING
POWER LEVEL
The microwave oven has ten preset power levels.
To cook manually at 100% Power:
1. Use number pads to enter desired cook time.
2. Touch START.
3. Oven will chime and ‘END’ will appear on control panel display when complete.
To cook manually at a Power level less than 100%:
1. Touch POWER LEVEL, then use number pads to select desired power level. Refer to chart below.
POWER LEVEL
POWER LEVEL 10
High
100%
POWER LEVEL, 9
90%
POWER LEVEL, 8
80%
POWER LEVEL, 7
Medium High
70%
POWER LEVEL, 6
60%
POWER LEVEL, 5
Medium
50%
POWER LEVEL, 4
40%
POWER LEVEL, 3
Medium Low/Defrost
30%
POWER LEVEL, 2
20%
POWER LEVEL, 1
Low
10%
To Restore Cook Time Completion Reminder:
1. Touch SETTINGS three times.
2. Touch START. ‘REMIND SIGNAL ON’ will appear on control panel display.
DEMONSTRATION MODE
Demonstration mode allows operation to be demonstrated without energizing the High Voltage circuit.
To enter Demonstration Mode:
1. Touch SETTINGS five times.
2. Touch START. ‘DEMO ON’ will appear on control panel display.
To exit Demonstration Mode:
1. Touch SETTINGS five times.
2. Touch START. ‘DEMO OFF’ will appear on control panel display.
MULTIPLE SEQUENCE COOKING
The microwave oven can be programmed for up to four automatic cooking sequences, switching from one power
level to another automatically.
To use Multiple Sequence cooking (e.g. start at 100%, then switch to 50% Power):
1. Touch POWER LEVEL twice, then use number pads to enter desired cook time.
2. Touch POWER LEVEL, then touch 5, then use number pads to enter a second cook time.
3. Touch START.
