Instruction Manual
Solar Pump Set GENUA, Article No. 01128
Distribution by Süd Solar GmbH, 71732 Tamm (Germany)
Copyright © Süd Solar GmbH 2009, Modifications reserved
www.sued-solar.de
REV-1-29-01-09
1.
Introduction
Dear Customer, thank you for having purchased one of our products. This product fulfils the
requirements of the valid European and National guidelines. The conformity has been
proved, the declarations in question and the documents are deposited at the
manufacturer`s.
2.
Security Advices
For damages caused by disregard of this instruction manual, the right of guarantee expires! For further
damages we do not accept any liability! For material or personal damage which occurs because of
inappropriate use or disregard of the security advices, we do not accept any liability. In such cases any right of
guarantee expires. Because of security reasons (CE) the alteration of the device is not permitted. Do not open.
Maintenance only to be executed by qualified personnel. The device is no toy. Inappropriate for children.
3.
Appropriate Use
The solar pump set is destined for outdoor use.
4.
Commissioning
Please pay attention,
that during operation splashing water can cause damages to the subsoil and the closer
environment of the fountain. Do only put up and use the pump kit in suitable places. We do not accept any
liability for damages which occur through spraying or running out water.
5.
Care, maintenance and malfunction
Clean the product only with a humid cloth. Please to not use any sharp cleaner or detergents. In the case of
malfunction of the pump check the position for sufficient sunlight. The function of the pump is only possible at
temporary direct sunlight on the solar module. At dull days the solar energy is possibly not enough to operate
the pump.
1. Take all parts carefully out of the package. Treat the solar modules very carefully. A broken solar
module is not subject to warranty adjustment.
2. Choose a suitable place for the battery box in order to protect it from direct meteorological influence,
for example from rain.
3. Fix the ground spike to the aluminium frame of the solar modules and install it in a sunny place. Ideal
is an orientation southward of both solar modules. Lay the cable of the solar module in order to avoid
stumbling blocks. Attach the cable of the first with the short cable of the second solar module and then
the long cable of the second solar module with the plug of the cable at the battery box. When the sun
shines on the solar modules the integrated battery is charged.
4. Compose the multipart standpipe and slide the LED ring for the lighting over it. Choose between multi-
jet fountain or mushroom nozzle. Now the standpipe is stuck on the stub of the pump which is then
placed in the pond.
4. Attach the two connecting cables of the pump and the LED ring with the appropriate connections at
the battery box.
5. Activate the solar pump set (button „EIN“(ON)). The pump starts working. At night the LED ring
switches itself automatically on to support the lighting (the LED „Automatisch“ (automatic) glows as
operation control for continuous operation). When pushing the button „AUS“ („OFF“) the pump is
switched off again. Another start is possible as long as the battery charge suffice.
For the fully automated operation every 24 hours the runtime is arbitrary:
After 1 or 2 or 4 hours the pump and the LED ring are switched off and the next day the spectacle
restarts at about the same time. The same is valid for all further days. (For operation control only one
of the three LED glows „1 Std.“ (1 hour), „2 Std.“ (2 hours) or „4 Std.“ (4 hours)).
6. With the controller at the battery box you can adjust the flow rate of the pump. So you can achieve
interesting effects in the pond depending on the different fountain adapters. The effects are pointed
out even more thanks to the atmospheric lighting in the darkness.
