10416UK
TO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM
WWW.SUEX.IT
Pag. 15
KEEP FLAMES AWAY WHEN OPENING THE HULL: EXPLOSION
HAZARD!
10 Tying the scooter to the diver
The ADV 7 underwater scooter has two handles the diver can hold to be towed. However,
for the best use of this type of scooter, wear the supplied harness with tow cord equipped
with quick release carabineer (supplied).
The harness must be worn so that is does not generate hazards during diving (for
this reason we strongly suggest you take a course held by a certified board) and the
tow cord, secured to the scooter, must be connected to the quick release
carabineer.
NOTE: before each dive, check that the quick release carabineer is
in good working order. To do this, pull the tow cord taut between
the harness ring and scoot and pull on the white knob. The
carabineer should immediately open and detach.
Defective quick release could create hazardous situations.
11 Setting regulation
The ADV setting must be
NEUTRAL
, meaning neither negative (sunk) or positive
(floating). It should remain stable at the desired quota. The vehicle is supplied with neutral
settings for fresh water. A ballast is supplied to compensate the difference between fresh
and salt water use.
11.1 Positioning the ballast for salt water use
The salt water ballast is attached to the scooter body by the two threaded knobs. Unscrew
the threaded knobs and remove the ballast for scooter use in fresh water.
Always leave the knobs screwed into the scooter to prevent losing them.
Threaded knobs
ballast
