10416UK
TO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM
WWW.SUEX.IT
Pag. 18
14.6 Muddy or murky environments
These are environments, occluded or not, where visibility may be
suddenly blinded due to the silt lifted when sediment is moved. Diving in
these environments is, in itself, EXTREMELY HAZARDOUS.
INCORRECT ADV USE IN MUDDY AND MURKY ENVIRONMENTS
COULD INCREASE DIVING RISKS
.
THUS, THIS TYPE OF DIVING REQUIRES SUITABLE TRAINING
COURSES HELD BY QUALIFIED BOARDS.
For example: propeller movement facing the bed could lift a significant
amount of silt.
Accidentally starting the spare ADV being towed could create seriously
hazardous situations.
14.7 ADV flooding, sinking
This could occur especially due to improper use, incorrect closing or
inefficient maintenance.
In the event of flooding, the scooter will start to tilt downward and thus
sink. In the event of
total
flooding, the situation could become
POTENTIALLY HAZARDOUS since the ADV will start to SINK,
DRAGGING THE DIVER DOWN
and therefore the vehicle
MUST BE
IMMEDIATELY ABANDONED.
15 General precautions
- Do not keep the ADV exposed to sun, closed in a car in the sun or exposed to
excessive heat (max 50°C). It could overheating, deforming, and couplings may no
longer guarantee water tightness.
- Avoid collisions when diving.
- Do not use it as a stool.
- Do not stand on it.
- Do not have it used by children or untrained people.
- Do not transport it dismantled or open.
- Do not charge the batteries with a battery charger other than the one supplied.
- Do not attempt to stop the propeller with your hands.
- Do not block the starter trigger when the switch is turned to on.
- Do not throw it off a boat or the shore.
- Do not dismantle it.
- Do not run it dry above water. Seal gaskets could rapidly deteriorate due to
overheating.
- Battery connectors must never come into contact with water. This would rust the silver
contact lining.
- Do not short circuit the battery.
- Do not remove wires from the connector or invert polarity.
- Do not get internal ADV parts and batteries wet.
