10
Door end side
Hanging side
Reference of a
Inside of cabin
Ceiling
Floor surface
Rear face of door
5
Installing parts to the door
brush seal
Rear face of door
rogo can be seen
in the upright position
Positioning unit
Cross-recessed bind self-tapping
screw 4.5 x 20
Mount the Positioning unit on the rear face of the door with
the provided screws so that the LAMP logo can be seen
properly.
Fixing Positioning unit
Stick the Brush seal to both edges on the rear face of the door.
Sticking Brush seal
Set core material of which strength is enough for secure tightening of self-tapping
screws to the locations that parts are to be installed.
Dimensions in lateral direction are determined with the (width) of the cabinet
(wooden frame) regarded as the reference position. If the door end face is
regarded as the reference position, add the overlaying allowance.
CAUTION
