7
Attach the Connection pipe to the cutout part on
both arms and fix it with the provided screws and flat
washers.
Torque the screws step by step, in a criss-cross
pattern, to prevent torsion of the pipe.
(1) Pipe length = Cabinet inside height - 350
(This does not include the caps on both ends.)
(2) Cut the pipe end without the clamp.
(3) Remove burrs around the cutting edge to prevent injury and
enable smooth insertion of the cap.
(4) Replace the cap on the cut end.
3
Installing Arm Connecting Pipe
1
Cutting Arm connecting pipe
2
Installing arm connecting pipe
Cut this end
Arm connecting pipe
Cap
Clamp
Cap
Pipe length = Cabinet inside height – 350
Upper arm
Flat washer
Hexagon socket
head cap screw
M6×35
Arm connecting pipe
Cut out
Cut out
Lower arm
Pipe clamp
Arm connecting pipe
Flat washer
Hexagon socket
head cap screw
M6×35
Tightening torque:11-13 N·m
