8
Quick Start Guide
Steps:
1. Plug-in 9vdc pedal power adapter.
2. Connect your guitar to the Input of the Woodshed Comp via a 1/4" cable.
3� Connect the Output of the Woodshed Comp to your amplifier's input.
4. Start with the Attack switch set to Fast (F)
5� With the Threshold Knob set all the way up (clockwise) and the
Ratio Knob all the way down (counterclockwise), set the Gain knob
around 12 O'clock. This is 'unity' gain. Adjust Gain Knob slightly as you
play and turn on and off the Woodshed Comp, to find the exact spot
where your volume is the same with the pedal on or off�
6� Set the Ratio Knob to ~10 O'clock
7� As you play, slowly turn the Threshold knob counterclockwise to lower the
Threshold of when compression begins. As you turn the Threshold down,
you will hear the Woodshed Comp compress your signal, lowering the
over-all volume�
8� Then adjust the Gain knob to "make-up" the volume loss and return your
signal to a similar level as when the Woodshed is off.
9� Now, listen to your compressed tone. If you wish to compress your signal
more, turn the Ratio knob (clockwise) to increase the compression ratio or
lower the Threshold knob (counterclockwise) to begin compressing your
signal at quieter playing levels, or both. Always use the Gain knob to bring
your levels back to unity gain.
(Quick Start Settings)
Summary of Contents for Andy Wood Woodshed COMP
Page 1: ...User Guide Andy Wood s...
