background image

4

Important Safety instructions

Please read this list of instructions to keep your 

Hombre running safely�

1. Read these instructions

2� Keep these instructions

3. Heed all warnings

4� Follow all instructions

5. Clean only with dry cloth

6. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions

7. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat

8. Protect the power cord from being walked on or pinched particularly at plugs

and the point where they exit from the apparatus

9. Only use attachments/accessories specified by the manufacturer

10. Unplug this apparatus during lightning storms or when unused for long periods of time

11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord 

or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not oper-

ate normally, or has been dropped

12. CAUTION: To disconnect the unit completely from the MAINS, unplug the unit. Turning the power switch off does not disconnect the unit completely 

from the MAINS.

13. The unit shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the unit.

14. WARNING: This is a Class I apparatus. It should be connected to a MAINS socket outlet with a protective earthing connection.

15. This equipment design typically applies to commercial or industrial equipment expected to be installed in locations where only adults are normally 

present�

Summary of Contents for Hombre












Reviews: