Suhr Hombre, User Manual

8

Tube-Biased Tremolo

This section will explain how to use the Hombre's Tube Biased Tremolo 

Circuit. Bias Tremolo circuits are truly unique in that the effect is created by 

modulating the bias of the power tubes. As the power tube bias is lowered 

and raised, it imparts an unmistakably rich, sought after sound, that only a 

Tube Bias Tremolo can�

Steps:  

1� First and foremost, in order to activate the Tube Bias Tremolo the included 

foot switch must be connected to the Tremolo Pedal jack on the back of 
the amp. Pressing the foot switch will turn the tremolo effect on and off.

2� Adjust Speed Knob to how fast or slow you wish the volume to modulate.
3� Adjust INTENSITY to set the depth of the tremolo effect making it more or 

less apparent� 
 
  IMPORTANT NOTE: The included foot switch must be connected to 

the Tremolo Pedal jack on the back of the amp in order to activate 

Tremolo�

!

!

☺

☺

HELPFUL TIP: There’s a distinct interaction that exists between the 

tremolo and the dynamics of the musician. The intensity of the trem-

olo can be influenced by how hard or soft the guitar is played. When 

the amp is pushed harder, or the musician plays harder, the trem-

olo effect is less noticeable, yet as the signal decays the effect be-

comes more apparent. This results in a stunning effect that lives and 

breathes with the music�

Tremolo Controls