EXCLUSIVE FEATURES:
True Bypass:
True Bypass via a relay is included in every Suhr pedal.
FxLink:
The FxLink can be utilized to remotely control the pedal. Shorting between the shield
and the tip will activate the pedal. Opening the connection will turn off the pedal. The
shield to ring connection is used to sense an external tap switch. It is active only in
Tap Tempo mode.
Battery Monitor:
The internal 9V battery is monitored at both power up and during use. The user will
be alerted when the battery voltage becomes low. When the battery becomes too low
to reliably operate the pedal, True Bypass is activated.
Low Battery Monitor:
Upon powering up the pedal, the battery voltage is measured. If the voltage is at a low
voltage (4.5V), the LED will flash 3 times to alert the user. Normal operation will then
resume. Should the battery fail completely (<4V), the
Jack Rabbit
Tremolo will switch
to true bypass mode and the LED will begin to flash. This will ensure that the signal
continues uninterrupted and undistorted. Should the LED flash become too annoying,
press the foot switch to turn it off. It's time to replace the battery....
