TFG2900A Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
55
t’ and ‘linear edit’ could be used to edit out it point by point. But the two methods are i
nconvenient to create the complicated waveform such as Sine, also it’s hard to make each
point of waveform very precisely.
Fortunately the build-in waveform of instrument help user to provide the available wavefor
m materials. Insert one of them to waveform editing area and use method of local modifi
cation or clipping or pasting to create a complicated waveform quickly without edit it poi
nt by point.
Press
〖
Insert Build-in
〗
soft key to enter the waveform selection interface and choose the
waveform you want to insert and press the soft key
〖
OK
〗
.
Press
〖
Build Params
〗
soft key and display a setting box. User can set parameters for the
waveform that will be inserted, as below picture shown.
Amplitude: Amplitude peak-to-peak value of the inserted waveform.
Offset: DC offset voltage of the inserted waveform.
Phase: Starting phase of the inserted waveform, taking the waveform itself as a reference
InsertPos: Inserts the waveform to any position that currently edited arbitrary waveform in
(X coordinate value).
Points: Total point numbers of inserted waveform, that’s the length of the inserted wavefor
m.
Modify the required parameters, use the original value if there is no modify options.
After finishing setting to inserted waveform, press
〖
Back
〗
continuously, to return to editi
ng interface of arbitrary waveform, then the selected waveform is inserted to the specified
position. If fail to return to the editing interface of arbitrary waveform, then the edited a
rbitrary waveform will be lost.