TFG2900A Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
75
2. Subdirectory area: to display the sub-directory of current directory and the file comply with the
type.
3. Type of operated file: it contains below types:
File of harmonic series: Harm_seq*.har
Frequency data file: Freq_data*.freq
Arbitrary wave data file: Arb_data*.arb
Arbitrary wave sequence file: Arb_seq*.wseq
Operating state file: State*.sta
FPGA Update file: Update_FPGA.bin
4. Current operation: to indicate the use of current opened file manager such as harmonic
synthesis, frequency sequences, arbitrary wave sequences, operating state, system update
5. Current file path: to indicate current operation directory of selected file.
3.19.2 Locate File
The files can be located by the following steps:
(1)
Open directory (folder): press right key to move the cursor to sub-directory area, then use
up/down key to select the file you want to open. Press
〖
Open Dir
〗
to show the next directories
and files whose type meets with the operation requirement. The files can be transferred to the
Current Directory Area on the left, while the files or document list included in the files are
displayed in the right Sub-directory Area. If the documents are failed to be found, generator
will continue select the file in the right sub-directory area until locating them.
(2)
Fold directory: press
〖
Fold Dir
〗
soft key to fold current directory and current directory area
to display top level directory.
(3)
Directory Branches: There might be various files when using USB device. Then both of the
directory open and fold directory will be used to search branches of files one by one to find
the required document. But the document is easy to be found in internal memory named
Local when the quantity files is not big.
3.19.3
Create Files
Create a file with the required type, avoiding replacing the existing file in the saving process.