TFG2900A Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
79
Type: the model of generator. It is fixed after leaving factory
Serial: It is fixed and unique.
Control: the version of controlling program. It mainly affects the operation of the generator, and
can be renewed after update of system.
FPGA: version of firmware. It mainly impact on function of the instrument, and can be renewed
after update of system.
3.21 System Update
For found Bug or some improvements to instrument, system update function is required to update
the bottom firmware and control program of instrument. If the update is failing, it will cause the
abnormal work of device and users have to return factory to repair. Therefore, please take care to
use this function and it’s better to contact us before update.
3.21.1 Control software update
The suffix of update package is ‘sys’. Rename it as ‘SysUpdate.sys’ and copy to a USB flash disk
with FAT32 format, then insert the USB to the USB Host interface in the front panel.
Power on the instrument, then press and hold
【
Reset
】
key at once until a message pops up on the
screen. Then release
【
Reset
】
key, and the message of completing updates will be displayed on the
screen several minutes later. Then the generator will reboot automatically to complete the update.
3.21.2 Firmware update