Sulion MUSTANG 72209, Manual

11

Caution

Follow these instructions carefully to enjoy maximum safety in the installation and opera-

tion of this equipment.

The minimum distance between the lamp and any illuminated objects must be greater 

than 1m.

The electrical installation of the ceiling fan must be carried out by an authorized electrician 

in order to be covered by our warranty.

Safety precautions 

The information contained in the following pages has been prepared to ensure 

your maximum enjoyment of your fan:

1.  To ensure successful installation, be sure to study the diagrams and 

follow the instructions carefully.

2.  For your safety, all electrical connections and disconnections should be 

performed by a qualified electrician.

3.  Any action performed for the electrical connection of the device must 

be carried out after ensuring that the general power supply is discon-

nected, by removing the corresponding fuse or disarming the protective 

switch in order to ensure total isolation of the power supply. 

4.  . When deciding where to mount the fan, be sure that there is at least 30 cm of space between the fan and any wall 

or other obstruction that the fan blades could collide with. The greater this distance, the more effective the air flow 

produced.After the fan is mounted, be sure that the blades are no less than 2.3 m above the ground.

5.  . The anchor point for the fan must be able to support a weight of at least 30 kg.  If mounting on a ceiling junction 

box, be sure that the fan is adequately supported to prevent loosening or turning. 

6.  The fan’s electrical connection must be “grounded” (the fan’s ground cable connected to the installation’s grounding 

network) in order to avoid any branching that may be dangerous to people.

7.  Do not connect the fan’s power supply to any dimmers, potentiometers, or light switches, as it will cause the fan to 

malfunction and/or will damage the motor. The fan must be directly connected to a properly protected installation cir-

cuit (magnetothermal differential switch with the adequate size for the fan’s consumption and technical specifications). 

Only use the fan’s control to turn it on or stop it.

8.  It is recommended to not use these types of fans along with gas installations simultaneously in the same room.

9.  The fan must be not be moving and must have come to a complete stop before changing its direction of rotation. 

This will prevent damage to its motor and to the control unit, when applicable.

10. Do not insert anything that could hit the fan’s blades into its pathway while it is moving, as this could cause damage 

to people, can damage the blades, and can offset the balance of the unit, causing vibrations and wobbling.

11. After installing the fan, ensure that all fastenings are secure and tightened in order to avoid any noise caused by loose 

elements.

12. Due to the fan’s movement, certain fastenings may become loose. Check all fastenings twice per year at a minimum 

in order to ensure that they are sufficiently tight. If necessary, they must be retightened.

Note: 

The important warnings and instructions indicated in this manual are not guaranteed to cover all possible conditions 

and situations that may occur. It must be understood that common sense, precaution, and care are factors that cannot be 

included in all products. These factors can and must only be provided by the user who maintains and enjoys this fan.

EN

Congratulations on your purchase

Congratulations  on  purchasing  the  latest  energy-efficient  ceiling  fan  technology. This  fan  uses  (AC)  alternating  current, 

allowing for very high energy efficiency and high air circulation volume without added noise.

Operation options: Your (AC) motor is the latest in fan design technology. It can be controlled via a wall panel, manually using 

a pull chain or using a remote control (depending on the model).