2.2 DESCRIPTION OF COMPONENTS
Refer to Figure 2-1. The components and assemblies of
the air compressor are clearly shown. The complete
package includes compressor, electric motor, starter,
compressor inlet system, compressor discharge system,
compressor lubrication and cooling system, capacity
control system, microprocessor controller, aftercooler, a
combination separator and trap, all mounted on a heavy
gauge steel frame.
On air-cooled models, a fan draws air into the enclosure
over the fan and main motors through the combined
aftercooler and fluid cooler thereby removing the
compression heat from the compressed air and the
cooling fluid, and forces it out the top of the machine.
This compressor model has easily accessible items such
as the fluid filter air/oil separator and control valves. The
inlet air filter is also easily accessible for servicing.
SU_0000082
11
6
1
7
2
8
3
9
4
10
5
1. Air Inlet Filter
2. Cooler
3. Motor
4. Fluid Fill
5. Starter Box
6. Controller
7. E-Stop Button
8. Separator Element Access
9. Sight Glasses
10. Moisture Separator
11. Fan Motor
Figure 2-1: Main Component Location
SECTION 2
6
1100e, 1500e, 1800e Operator’s Manual and Parts List
®
SULLAIR
®
Summary of Contents for 1107e
Page 101: ...THIS PAGE INTENTIONALLY LEFT BLANK...