Section 3
SPECIFICATIONS
21
3.1 SPECIFICATIONS- LS20T (525 PSIG)
DIMENSIONS WITHOUT ENCLOSURE (I)
Model Series
Length
Width
Height
Weight
in
mm
in
mm
in
mm
lb
kg
LS20T
120.00
3048
71.69
1821
92.09
2339
(II)
(II)
(I)
Enclosure height = 73.87in/ 1876mm.
(II)
For information concerning compressor weight, please contact the Sullair Factory Sales Department.
For noise level information, please contact the Sullair Factory Service Department.
3.2 LUBRICATION GUIDE
for fluid fill port location. The
Sullair LS20T (525 PSIG) compressor is filled with
LLL-4-46 fluid as factory fill.
To be sure that you receive the correct fluid for
your compressor, when ordering fluid, always
confirm your compressor’s fluid fill with the parts
technician by using your compressor’s serial
number.
Mixing of other fluids within the compressor will
void all warranties.
Fluid should be changed every 1200-1400 hours or
once a year, whichever comes first. The fluid should
be changed more frequently under severe operat-
ing conditions, such as high ambient temperatures
coupled with high humidity, or when high particulate
level, corrosive gases or strong oxidizing gases are
present in the air.
Maintenance of all other components is still recom-
mended as indicated in the Operator’s Manual.
COMPRESSOR:
Type:
2-Stage Oil Flooded Rotary
Maximum Full Load Operating Pressure:
525 psig (36.1 bar)
Bearing Type:
Anti-Friction
Cooling:
Pressurized Compressor Fluid
Lubricant:
LLL-4-46
System Fluid Capacity (refill):
25 U.S. Gallons (94.6 Liters)
Control:
Supervisor™ Controller
Capacity Range:
500, 630, 750 CFM
MOTOR:
Type:
O.D.P., 460V, A.C., Three Phase, 60 Cycles
Size:
250, 300 and 350HP
Speed:
1800 RPM
Figure 3-1 Fluid Fill Port Location
Summary of Contents for LS-20T
