16E / 16E-H / 16E-P Spray Gun
15
MAN 96150 EN 01
2.1
Technical Data
16E / 16E-H / 16E-P Spray Gun
Feature / Requirement
SI Units
US Units
Weight
2.83 kg
6.25 lb
Wire Feed Rate:
16E / 16E-P
0.6 – 4.6 m/min
2 ft/min – 15.1 ft/min
16E-H
1.4 – 11.7 m/min
4.5 ft/min – 38.5 ft/min
Spray Distance
130 – 205 mm
5” – 8”
Compressed Air Requirements
(Dried, Filtered, Oil-Free)
0.85 m
3
/min at 4.5 bar
30 CFM at 70 PSI
Process Gases:
Oxygen
3.45 bar at 85.4 NLPM
50 PSI at 195 SCFH)
Acetylene
1.03 bar at 21.9 NLPM
15 PSI at 50 SCFH
Propane
3.45 bar at 18.4 NLPM
50 PSI at 42 SCFH
MAPP (MPS)
3.45 bar at 17.5 NLPM
50 PSI at 40 SCFH
Hydrogen
1.72 bar at 92.0 NLPM
25 PSI at 210 SCFH)
Wire Sizes:
1
1. All wire sizes cannot necessarily be used with all gases. See
“Hardware Selection” on page 26.
4.76 mm
2
2. Wire sizes are listed in SI units for reference only. Wires for the
16E / 16E-H / 16E-P Spray Gun are supplied in standard US units
or average wire gauge (AWG).
3/16 in
3.97 mm
5/32 in
3.18 mm
1/8 in
3.06 mm
11 gauge
1.83 – 0.88 mm
15 – 20 gauge
16e_techdata
267 mm
(10.5”)
159 mm (6.25”)
241 mm
(9.5”)
