16E / 16E-H / 16E-P Spray Gun
14
MAN 96150 EN 01
2
Product Description
The 16E / 16E-H / 16E-P Spray Gun is a hand-held, wire-fed, combus-
tion thermal spray gun. The spray gun is capable of using all com-
monly available combustion fuel gases, with oxygen to produce flame
sprayed coatings from Sulzer Metco metallizing wires. The spray gun
is intended mainly for hand-held operation. A tool post on the front of
the spray gun provides for machine or tool mounting.
There are three versions of the spray gun:
16E (Standard)
• 3.2 mm (1/8”) and 2.3 mm (11 Ga.) wire
• Optional hardware available for wire size ranging from 4.8 mm (3/
16”) to 1.45 mm (15 Ga.)
• Standard fuel gas = acetylene
• Other fuel gas = propane (natural gas, MPS)
16E-H (High-Speed)
• 3.2 mm (1/8”) and 4.8 mm (3/16”) soft wire (such as babbitt, tin,
zinc)
• Non load air cap
• Stepped down drive rolls
• High speed gear
16E-P (Propane)
• 3.2 mm (1/8”) and 4.8 mm (3/16”) wire
• Standard fuel gas = propane
16e_overview