7
1.
Lightly grease propeller boss and shaft end.
2.
Push on propeller (3/6).
3.
Fit o-ring (3/5).
4.
Insert propeller washer (3/2).
5.
Fit o-ring (3/4).
6.
Fit lock washers (3/3) taking care that orientation is correct
7.
Tighten socket head screw (3/1) with torque of 56 Nm.
5.3
Tightening torque
See chapter 8.2 of the Installation and Operating Instructions 15972513-EU.
5.4
Installation example XRW 750
We recommend that the closed bracket be used for this type of installation.
1
2
4
6
5
3
1581-0005
Legend
1 Hoist with winch and rope
2 Upper bracket with locking plate
3 Closed bracket
4 Bottom plate
5 Safety stop clamp
6 Swivelling square guide tube
7 Cable clamp with cable hook
Figure 4 Installation example XRW 7511
5.5
Brackets XRW
See chapter 8.5 of the Installation and Operating Instructions 15972513-EU.
5.6
Guide tube lengths (square tube) XRW
See chapter 8.6 of the Installation and Operating Instructions 15972513-EU. XRW 750 = XRW 900.
5.7
Electrical connection
See chapter 9 of the Installation and Operating Instructions 15972513-EU.
6 - 7 Commissioning; Maintenance
See chapter 12 - 13 of the Installation and Operating Instructions 15972513-EU.
EN 1585-A