8
EN
81907004I
Temperature and leakage relay type ABS CA 462, Installation guide
4.2
Cleaning
How to clean the unit
Powers off the unit and only outside/front shall be cleaned by using a dry, soft
cloth. A good choice would be the microfiber type of cloth and gently wipe the
CA 462 unit on front in order not to scratch the overlay. If the dry cloth did not
completely remove the dirt, do not press harder in an attempt to scrub it off. If
necessary, moisten the cloth by adding a small amount of water with thin solution
of mild detergent and try again. Never use detergent with polish or solvent which
can have an impact of the plastic surface.
