SUMERAIN SANITARY GROUP WWW.SUMERAIN.COM
6.5
Turn on and adjust the cartridge to achieve desired shower water’s maximum temperature.
Anti-scald protection. It is important that the mixer valve is tested regularly to prevent the risk of scalding and guarantee user
safety. This can be carried out as follows: with the mixer blend temperature set at 38°C isolate the cold water supply. The outlet
flow rate will reduce to a safe level.
Recommended outlet temperatures
We recommend the following set maximum mixed water outlet temperatures for use in all premises:
111.2
°
F [44°C] - for bath fill but see notes below.
105.8
°
F[41°C] - for showers.
105.8
°
F[41°C ]- for washbasins.
100.4
°
F[38°C] - for bidets.
The mixed water temperatures must never exceed 114.8
°
F[46°C] at terminal fitting.
6.6
Attach the temperature limit ring to cartridge for locking the maximum temperature. Reinstall the escutcheon to the bonnet too
6.7
Attach the escutcheon over the valve body.
