4
SD카드분리방법
시동을 끄거나 본체의 전원 선을 분리하면 본체의 전원이 꺼집니다.(상시 전원 연결 시
SD카드를 삽입하거나 분리할 경우 본체의 전원을 OFF한 다음 아래의 순서대로 진행하여
십시오.
SD카드 분리 시
1
차의 시동을 OFF합니다.
2
LED가 모두 소등되었는지 확인합니다.
3
LED가 완전히 소등된 후 SD카드를 분리합니다.
(SD카드를 강제로 분리할 시 고장의 원인이 되며, 가볍게 한번 누르면 손쉽게 분리됩니다.)
SD카드 삽입 시
1
SD카드를 블랙박스 본체 SD삽입구에 넣습니다.
2
전원 선을 블랙박스 본체에 연결한 후, 시동을 켭니다.
※ 전원 선을 반드시 분리한 후 SD카드를 삽입 또는 분리하시길 바랍니다.
●
Only use Micro SD memory card provided from manufacturer or those with class 10 or UHS1.
●
Do not open/fix/modify Micro SD card.
●
Micro SD card is consumable and recommended to be replaced with a new card after six (6) months.
Product may not function properly if micro SD card's working speed decreases.
●
Check micro SD card's data regularly to check its operation
.
It is recommended to format micro SD card at least once a month for the optimal performance.
Important data have to be backed up prior to format since format will delete all data.
1.
Warranty will be voided if above are not kept by user
.
●
Backup micro SD card memory to HDD or CD/DVD if any data is needed to be preserved
.
Data might get lost due to the memory corruption in micro SD card.
●
Insert or remove the micro SD card when the power in the product is completely off.
●
Do not remove micro SD
c
ard while firmware is being updated. This could cause a malfunction to the device
.
●
Do not remove micro SD card while it is saving or reading.
Note
5
B
2
.
Micro SD Card
2.
Manufacturer is not liable for micro SD
c
ards
'
recorded contents outside of its
recommended product life.
3
.
If SD card is purchased separately by user, please format SD card prior to use.
Summary of Contents for SMVB-6100
Page 1: ...User manual...